WHY PROFESSIONAL DISHWASHER INSTALLATION BY A PLUMBER IS VITAL

Why Professional Dishwasher Installation by a Plumber is Vital

Why Professional Dishwasher Installation by a Plumber is Vital

Blog Article

Book Today
Should You Install Your Own Dishwasher?
From carrying a dishwashing machine right into your house to affixing the water links, setting up a dish washer can take up to five hours. If you do not have the right devices, it could take even longer. To make your life simpler as well as to prevent mounting a dish washer inaccurately, we advise hiring a professional plumber. A plumber will certainly have the right devices accessible and also can mount your brand-new dishwashing machine in under two hours. If you're not quite convinced yet, maintain checking out to learn why you need to hire a plumber.

A Plumber Can Inspect the Supply Lines


A supply line, specifically a dishwasher connector, connects the dishwasher to a water source. If you buy a new supply line, a plumber can guarantee that the line is compatible with both your dish washer as well as water source. If you determine to make use of an existing supply line, an expert plumber can inspect it to make sure that it remains in good condition and does not have any kind of leakages.

An Improper Installment Can Invalidate the Dishwasher's Warranty


Before installing a dishwasher by yourself, you should review the service warranty very carefully. Even a little harming the dishwasher throughout the installation procedure can void the service warranty. Considering that the cost of a dishwashing machine varies between $300 to $1,000 and upwards, that can be a pricey error. Even if the dishwasher still functions, you will certainly not be able to change it needs to it break soon. Unless you are useful as well as have experience setting up dishwashing machines, you must work with a plumber so you do not risk your guarantee.

Installing a Dishwashing Machine Requires a Selection of Tools


If you do not have a selection of tools accessible, you may require to make a journey to Lowe's or Home Depot. To set up a dish washer, you require the adhering to tools: pliers, an adjustable wrench, a collection of screwdrivers, a tube cutter, and also hole saws. You will additionally require cleansing products such as a shallow pail as well as sponge. If you do not have any of these products, the price to purchase them can accumulate quickly.

Not Installing Your Dishwashing Machine Properly Can Bring About a Hill of Issues


Not just can mounting a dish washer appropriately invalidate your guarantee, however it can also create a mess. If you incorrectly install your dishwasher to the trash disposal, you may see pungent scents or have residue on your meals.

A Plumber Can End Up the Task Affordably and also Promptly


You do not intend to obtain stuck washing your meals by hand. A plumber can install your dishwasher in one to two hrs. Also, the typical plumber will not charge more than a number of hundred dollars to install your dishwashing machine. Why risk your warranty as well as possibly need to acquire a brand-new dish washer? Take the easy and secure path by working with a plumber.
From hauling a dishwashing machine right into your residence to connecting the water links, installing a dish washer can take up to 5 hrs. To make your life easier and also to stay clear of mounting a dish washer inaccurately, we suggest hiring a professional plumber. A plumber will certainly have the right tools on hand and also can mount your new dish washer in under 2 hrs. A supply line, particularly a dish washer port, attaches the dishwasher to a water source. Unless you are convenient and also have experience setting up dishwashers, you need to employ a plumber so you don't risk your service warranty.

How To Install A Dishwasher


Installing A Dishwasher Yourself


Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.


Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.


Steps Involved In Dishwasher Installation


Step One: Gather the Necessary Supplies


Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:


  • A screwdriver

  • • A hose clamp

  • • Duct tape (optional)

  • • A brass fitting

  • • Teflon tape

  • • A pair of pliers

  • • An adjustable wrench

  • • A drill

  • • Braided steel water line

  • • A pair of rubber hand gloves (optional)

  • • Wire nuts

  • Step Two: Take Safety Measures


    First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.


    Step Three: Remove the Old Dishwasher


    This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.


    Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.


    Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.


    With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.


    Skip this step if you are having a dishwasher installed for the first time in your kitchen.


    Step Four: Install the New Dishwasher


    Connect the Water Supply


    Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.


    Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.


    Attach the Drain Line


    Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece


    Slide the Dishwasher into Place


    Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.


    Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.

    https://www.movementplumbing.com/blog/how-to-install-a-dishwasher


    How to install a dishwasher safely
    Click Here

    Report this page